DCIPs/eip-4573.md at 58b766a9239b34a0ac2934744f6d5124a1ba7c54

8.3 KiB

Raw Blame History

eip	title	description	status	type	category	author	discussions-to	created	requires
4573	Procedures for the EVM	Introduces support for EVM Procedures.	Stagnant	Standards Track	Core	Greg Colvin (@gcolvin), Greg Colvin <greg@colvin.org>	https://ethereum-magicians.org/t/eip-4573-named-procedures-for-evm-code-sections/7776	2021-12-16	2315, 3540, 3670, 3779, 4200

Abstract

Five EVM instructions are introduced to define, call, and return from named EVM procedures and access their call frames in memory - ENTERPROC, LEAVEPROC, CALLPROC, RETURNPROC, and FRAMEADDRESS.

Motivation

Currently, Ethereum bytecode has no syntactic structure, and subroutines have no defined interfaces.

We propose to add procedures -- delimited blocks of code that can be entered only by calling into them via defined interfaces.

Also, the EVM currently has no automatic management of memory for procedures. So we also propose to automatically reserve call frames on an in-memory stack.

Constraints on the use of procedures must be validated at contract initialization time to maintain the safety properties of EIP-3779: Valid programs will not halt with an exception unless they run out of gas or recursively overflow stack.

Prior Art

The terminology is not well-defined, but we will follow Intel in calling the low-level concept subroutines and the higher level concept procedures. The distinction is that subroutines are little more than a jump that knows where it came from, whereas procedures have a defined interface and manage memory as a stack. EIP-2315 introduces subroutines, and this EIP introduces procedures.

Specification

Instructions

ENTERPROC (0x??) dest_section: uint8, dest_offset: uint8, n_inputs: uint16, n_outputs: uint16, n_locals: uint16

frame_stack.push(FP)
FP -= n_locals * 32
PC +- <length of immediates>

Marks the entry point to a procedure

at offset dest_offset from the beginning of the dest_section.
taking n_inputs arguments from the data stack,
returning n_outputs values on the data stack, and
reserving n_locals words of data in memory on the frame stack.

Procedures can only be entered via a CALLPROC to their entry point.

LEAVEPROC (0x??)

   FP = frame_stack.pop()
   asm RETURNSUB

Pop the frame stack and return to the calling procedure using RETURNSUB.

Marks the end of a procedure. Each ENTERPROC requires a closing LEAVEPROC.

Note: Attempts to jump into a procedure (including its LEAVEPROC) from outside of the procedure or to jump or step to ENTERPROC at all must be prevented at validation time. CALLPROC is the only valid way to enter a procedure.

CALLPROC (0x??) dest_section: uint16, dest_proc: uint16

  FP -= n_locals
  asm JUMPSUB <offset of section> + <offset of procedure>

Allocate a stack frame and transfer control and JUMPSUB to the Nth (N=dest_proc) procedure in the Mth(M=dest_section) section of the code. Section 0 is the current code section, any other code sections are indexed starting at 1.

Note: That the procedure is defined and the required n_inputs words are available on the data stack must be shown at validation time.

RETURNPROC (0x??)

   FP += n_locals
   asm RETURNSUB

Pop the frame stack and return control to the calling procedure using RETURNSUB.

Note: That the promised n_outputs words are available on the data stack must be shown at validation time.

FRAMEADDRESS (0x??) offset: int16

asm PUSH2 FP + offset

Push the address FP + offset onto the data stack.

Call frame data is addressed at an immediate offset relative to FP.

Typical usage includes storing data on a call frame

PUSH 0xdada
FRAMEADDRESS 32
MSTORE

and loading data from a call frame

FRAMEADDRESS 32
MLOAD

Memory Costs

Presently,MSTORE is defined as

   memory[stack[0]...stack[0]+31] = stack[1]
   memory_size = max(memory_size,floor((stack[0]+32)÷32)

where memory_size is the number of active words of memory above 0.

We propose to treat memory addresses as signed, so the formula needs to be

   memory[stack[0]...stack[0]+31] = stack[1]
   if (stack[0])+32)÷32) < 0
      negative_memory_size = max(negative_memory_size,floor((stack[0]+32)÷32))
   else
      positive_memory_size = max(positive_memory_size,floor((stack[0]+32)÷32))
   memory_size = positive_memory_size + negative_memory_size

where negative_memory_size is the number of active words of memory below 0 and
where positive_memory_size is the number of active words of memory at or above 0.

Call Frame Stack

These instructions make use of a frame stack to allocate and free frames of local data for procedures in memory. Frame memory begins at address 0 in memory and grows downwards, towards more negative addresses. A frame is allocated for each procedure when it is called, and freed when it returns.

Memory can be addressed relative to the frame pointer FP or by absolute address. FP starts at 0, and moves downward towards more negative addresses to point to the frame for each CALLPROC and moving upward towards less negative addresses to point to the previous frame for the corresponding RETURNPROC.

Equivalently, in the EVM's twos-complement arithmetic, FP moves from the highest address down, as is common in many calling conventions.

For example, after an initial CALLPROC to a procedure needing two words of data the frame stack might look like this

     0-> ........
         ........
    FP->

Then, after a further CALLPROC to a procedure needing three words of data the frame stack would like this

     0-> ........
         ........
   -64-> ........
         ........
         ........
    FP->

After a RETURNPROC from that procedure the frame stack would look like this

     0-> ........
         ........
    FP-> ........
         ........
         ........

and after a final RETURNPROC, like this

    FP-> ........
         ........
         ........
         ........
         ........

Rationale

There is actually not much new here. It amounts to EIP-615, refined and refactored into bite-sized pieces, along lines common to other machines.

This proposal uses the EIP-2315 return stack to manage calls and returns, and steals ideas from EIP-615, EIP-3336, and EIP-4200. ENTERPROC corresponds to BEGINSUB from EIP-615. Like EIP-615 it uses a frame stack to track call-frame addresses with FP as procedures are entered and left, but like EIP-3336 and EIP-3337 it moves call frames from the data stack to memory.

Aliasing call frames with ordinary memory supports addressing call-frame data with ordinary stores and loads. This is generally useful, especially for languages like C that provide pointers to variables on the stack.

The design model here is the subroutines and procedures of the Intel x86 architecture.

JUMPSUB and RETURNSUB (from EIP-2315 -- like CALL and RET -- jump to and return from subroutines.
ENTERPROC -- like ENTER -- sets up the stack frame for a procedure.
CALLPROC amounts to a JUMPSUB to an ENTERPROC.
RETURNPROC amounts to an early LEAVEPROC.
LEAVEPROC -- like LEAVE -- takes down the stack frame for a procedure. It then executes a RETURNSUB.

Backwards Compatibility

This proposal adds new EVM opcodes. It doesn't remove or change the semantics of any existing opcodes, so there should be no backwards compatibility issues.

Security

Safe use of these constructs must be checked completely at validation time -- per EIP-3779 -- so there should be no security issues at runtime.

ENTERPROC and LEAVEPROC must follow the same safety rules as for JUMPSUB and RETURNSUB in EIP-2315. In addition, the following constraints must be validated:

EveryENTERPROC must be followed by a LEAVEPROC to delimit the bodies of procedures.
There can be no nested procedures.
There can be no jump into the body of a procedure (including its LEAVEPROC) from outside of that body.
There can be no jump or step to BEGINPROC at all -- only CALLPROC.
The specified n_inputs and n_outputs must be on the stack.

8.3 KiB Raw Blame History