--- eip: 1474 title: Remote procedure call specification author: Paul Bouchon , Erik Marks (@rekmarks) discussions-to: https://ethereum-magicians.org/t/eip-remote-procedure-call-specification/1537 status: Stagnant type: Standards Track category: Interface created: 2018-10-02 --- ## Simple Summary This proposal defines a standard set of remote procedure call methods that an Ethereum node should implement. ## Abstract Nodes created by the current generation of Ethereum clients expose inconsistent and incompatible remote procedure call (RPC) methods because no formal Ethereum RPC specification exists. This proposal standardizes such a specification to provide developers with a predictable Ethereum RPC interface regardless of underlying node implementation. ## Specification ### Concepts #### RFC-2119 The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC-2119](https://www.ietf.org/rfc/rfc2119.txt). #### JSON-RPC Communication with Ethereum nodes is accomplished using [JSON-RPC](https://www.jsonrpc.org/specification), a stateless, lightweight [remote procedure call](https://en.wikipedia.org/wiki/Remote_procedure_call) protocol that uses [JSON](http://www.json.org/) as its data format. Ethereum RPC methods **MUST** be called using [JSON-RPC request objects](https://www.jsonrpc.org/specification#request_object) and **MUST** respond with [JSON-RPC response objects](https://www.jsonrpc.org/specification#response_object). #### Error codes If an Ethereum RPC method encounters an error, the `error` member included on the response object **MUST** be an object containing a `code` member and descriptive `message` member. The following list contains all possible error codes and associated messages: |Code|Message|Meaning|Category| |-|-|-|-| |-32700|Parse error|Invalid JSON|standard| |-32600|Invalid request|JSON is not a valid request object|standard| |-32601|Method not found|Method does not exist|standard| |-32602|Invalid params|Invalid method parameters|standard| |-32603|Internal error|Internal JSON-RPC error|standard| |-32000|Invalid input|Missing or invalid parameters|non-standard| |-32001|Resource not found|Requested resource not found|non-standard| |-32002|Resource unavailable|Requested resource not available|non-standard| |-32003|Transaction rejected|Transaction creation failed|non-standard| |-32004|Method not supported|Method is not implemented|non-standard| |-32005|Limit exceeded|Request exceeds defined limit|non-standard| |-32006|JSON-RPC version not supported|Version of JSON-RPC protocol is not supported|non-standard| Example error response: ```sh { "id": 1337 "jsonrpc": "2.0", "error": { "code": -32003, "message": "Transaction rejected" } } ``` #### Value encoding Specific types of values passed to and returned from Ethereum RPC methods require special encoding: ##### `Quantity` - A `Quantity` value **MUST** be hex-encoded. - A `Quantity` value **MUST** be "0x"-prefixed. - A `Quantity` value **MUST** be expressed using the fewest possible hex digits per byte. - A `Quantity` value **MUST** express zero as "0x0". Examples `Quantity` values: |Value|Valid|Reason| |-|-|-| |0x|`invalid`|empty not a valid quantity| |0x0|`valid`|interpreted as a quantity of zero| |0x00|`invalid`|leading zeroes not allowed| |0x41|`valid`|interpreted as a quantity of 65| |0x400|`valid`|interpreted as a quantity of 1024| |0x0400|`invalid`|leading zeroes not allowed| |ff|`invalid`|values must be prefixed| ##### `Block Identifier` The RPC methods below take a default block identifier as a parameter. - `eth_getBalance` - `eth_getStorageAt` - `eth_getTransactionCount` - `eth_getCode` - `eth_call` - `eth_getProof` Since there is no way to clearly distinguish between a `Data` parameter and a `Quantity` parameter, [EIP-1898](./eip-1898.md) provides a format to specify a block either using the block hash or block number. The block identifier is a JSON `object` with the following fields: |Property|Type|Description| |-|-|-| |`[blockNumber]`|{[`Quantity`](#quantity)}|The block in the canonical chain with this number| |OR `[blockHash]`|{[`Data`](#data)}|The block uniquely identified by this hash. The `blockNumber` and `blockHash` properties are mutually exclusive; exactly one of them must be set.| |`requireCanonical`|{`boolean`}|(optional) Whether or not to throw an error if the block is not in the canonical chain as described below. Only allowed in conjunction with the `blockHash` tag. Defaults to `false`.| If the block is not found, the callee SHOULD raise a JSON-RPC error (the recommended error code is `-32001: Resource not found`. If the tag is `blockHash` and `requireCanonical` is `true`, the callee SHOULD additionally raise a JSON-RPC error if the block is not in the canonical chain (the recommended error code is `-32000: Invalid input` and in any case should be different than the error code for the block not found case so that the caller can distinguish the cases). The block-not-found check SHOULD take precedence over the block-is-canonical check, so that if the block is not found the callee raises block-not-found rather than block-not-canonical. ##### `Data` - A `Data` value **MUST** be hex-encoded. - A `Data` value **MUST** be "0x"-prefixed. - A `Data` value **MUST** be expressed using two hex digits per byte. Examples `Data` values: |Value|Valid|Reason| |-|-|-| |0x|`valid`|interpreted as empty data| |0x0|`invalid`|each byte must be represented using two hex digits| |0x00|`valid`|interpreted as a single zero byte| |0x41|`true`|interpreted as a data value of 65| |0x004200|`true`|interpreted as a data value of 16896| |0xf0f0f|`false`|bytes require two hex digits| |004200|`false`|values must be prefixed| ##### Proposing changes New Ethereum RPC methods and changes to existing methods **MUST** be proposed via the traditional EIP process. This allows for community consensus around new method implementations and proposed method modifications. RPC method proposals **MUST** reach "draft" status before being added to this proposal and the official Ethereum RPC specification defined herein. ### Methods #### web3_clientVersion ##### Description Returns the version of the current client ##### Parameters _(none)_ ##### Returns {`string`} - client version ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "web3_clientVersion", "params": [], }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "Mist/v0.9.3/darwin/go1.4.1" } ``` --- #### web3_sha3 ##### Description Hashes data using the Keccak-256 algorithm ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|data to hash| ##### Returns {[`Data`](#data)} - Keccak-256 hash of the given data ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "web3_sha3", "params": ["0x68656c6c6f20776f726c64"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xc94770007dda54cF92009BFF0dE90c06F603a09f" } ``` --- #### net_listening ##### Description Determines if this client is listening for new network connections ##### Parameters _(none)_ ##### Returns {`boolean`} - `true` if listening is active or `false` if listening is not active ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "net_listening", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": true } ``` --- #### net_peerCount ##### Description Returns the number of peers currently connected to this client ##### Parameters _(none)_ ##### Returns {[`Quantity`](#quantity)} - number of connected peers ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "net_peerCount", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x2" } ``` --- #### net_version ##### Description Returns the chain ID associated with the current network ##### Parameters _(none)_ ##### Returns {`string`} - chain ID associated with the current network Common chain IDs: - `"1"` - Ethereum mainnet - `"3"` - Ropsten testnet - `"4"` - Rinkeby testnet - `"42"` - Kovan testnet **Note:** See EIP-155 for a [complete list](./eip-155.md#list-of-chain-ids) of possible chain IDs. ##### Example ```sh # Request curl -X POST --data '{ "id": 1337 "jsonrpc": "2.0", "method": "net_version", "params": [], }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "3" } ``` --- #### eth_accounts ##### Description Returns a list of addresses owned by this client ##### Parameters _(none)_ ##### Returns {[`Data[]`](#data)} - array of addresses ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_accounts", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": ["0xc94770007dda54cF92009BFF0dE90c06F603a09f"] } ``` --- #### eth_blockNumber ##### Description Returns the number of the most recent block seen by this client ##### Parameters _(none)_ ##### Returns {[`Quantity`](#quantity)} - number of the latest block ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_blockNumber", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xc94" } ``` --- #### eth_call ##### Description Executes a new message call immediately without submitting a transaction to the network ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Data`](#data)} `[from]` - transaction sender
@property {[`Data`](#data)} `to` - transaction recipient or `null` if deploying a contract
@property {[`Quantity`](#quantity)} `[gas]` - gas provided for transaction execution
@property {[`Quantity`](#quantity)} `[gasPrice]` - price in wei of each gas used
@property {[`Quantity`](#quantity)} `[value]` - value in wei sent with this transaction
@property {[`Data`](#data)} `[data]` - contract code or a hashed method call with encoded args| |2|{[`Quantity`](#quantity)\|`string`\|[`Block Identifier`](#block-identifier)}|block number, or one of `"latest"`, `"earliest"` or `"pending"`, or a block identifier as described in [`Block Identifier`](#block-identifier)| ##### Returns {[`Data`](#data)} - return value of executed contract ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_call", "params": [{ "data": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675", "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155", "gas": "0x76c0", "gasPrice": "0x9184e72a000", "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", "value": "0x9184e72a" }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x" } ``` --- #### eth_coinbase ##### Description Returns the coinbase address for this client ##### Parameters _(none)_ ##### Returns {[`Data`](#data)} - coinbase address ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_coinbase", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xc94770007dda54cF92009BFF0dE90c06F603a09f" } ``` --- #### eth_estimateGas ##### Description Estimates the gas necessary to complete a transaction without submitting it to the network **Note:** The resulting gas estimation may be significantly more than the amount of gas actually used by the transaction. This is due to a variety of reasons including EVM mechanics and node performance. ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Data`](#data)} `[from]` - transaction sender
@property {[`Data`](#data)} `[to]` - transaction recipient
@property {[`Quantity`](#quantity)} `[gas]` - gas provided for transaction execution
@property {[`Quantity`](#quantity)} `[gasPrice]` - price in wei of each gas used
@property {[`Quantity`](#quantity)} `[value]` - value in wei sent with this transaction
@property {[`Data`](#data)} `[data]` - contract code or a hashed method call with encoded args| |2|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| ##### Returns {[`Quantity`](#quantity)} - amount of gas required by transaction ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_estimateGas", "params": [{ "data": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675", "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155", "gas": "0x76c0", "gasPrice": "0x9184e72a000", "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", "value": "0x9184e72a" }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x5208" } ``` --- #### eth_gasPrice ##### Description Returns the current price of gas expressed in wei ##### Parameters _(none)_ ##### Returns {[`Quantity`](#quantity)} - current gas price in wei ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_gasPrice", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x09184e72a000" } ``` --- #### eth_getBalance ##### Description Returns the balance of an address in wei ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address to query for balance| |2|{[`Quantity`](#quantity)\|`string`\|[`Block Identifier`](#block-identifier)}|block number, or one of `"latest"`, `"earliest"` or `"pending"`, or a block identifier as described in [`Block Identifier`](#block-identifier)| ##### Returns {[`Quantity`](#quantity)} - balance of the provided account in wei ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getBalance", "params": ["0xc94770007dda54cF92009BFF0dE90c06F603a09f", "latest"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x0234c8a3397aab58" } ``` --- #### eth_getBlockByHash ##### Description Returns information about a block specified by hash ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a block| |2|{`boolean`}|`true` will pull full transaction objects, `false` will pull transaction hashes| ##### Returns {`null|object`} - `null` if no block is found, otherwise a block object with the following members: - {[`Data`](#data)} `extraData` - "extra data" field of this block - {[`Data`](#data)} `hash` - block hash or `null` if pending - {[`Data`](#data)} `logsBloom` - logs bloom filter or `null` if pending - {[`Data`](#data)} `miner` - address that received this block's mining rewards - {[`Data`](#data)} `nonce` - proof-of-work hash or `null` if pending - {[`Data`](#data)} `parentHash` - parent block hash - {[`Data`](#data)} `receiptsRoot` -root of the this block's receipts trie - {[`Data`](#data)} `sha3Uncles` - SHA3 of the uncles data in this block - {[`Data`](#data)} `stateRoot` - root of this block's final state trie - {[`Data`](#data)} `transactionsRoot` - root of this block's transaction trie - {[`Quantity`](#quantity)} `difficulty` - difficulty for this block - {[`Quantity`](#quantity)} `gasLimit` - maximum gas allowed in this block - {[`Quantity`](#quantity)} `gasUsed` - total used gas by all transactions in this block - {[`Quantity`](#quantity)} `number` - block number or `null` if pending - {[`Quantity`](#quantity)} `size` - size of this block in bytes - {[`Quantity`](#quantity)} `timestamp` - unix timestamp of when this block was collated - {[`Quantity`](#quantity)} `totalDifficulty` - total difficulty of the chain until this block - {`Array`} `transactions` - list of transaction objects or hashes - {`Array`} `uncles` - list of uncle hashes ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getBlockByHash", "params":["0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", true] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "difficulty": "0x027f07", "extraData": "0x0000000000000000000000000000000000000000000000000000000000000000", "gasLimit": "0x9f759", "gasUsed": "0x9f759", "hash": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "logsBloom": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "miner": "0x4e65fda2159562a496f9f3522f89122a3088497a", "nonce": "0xe04d296d2460cfb8472af2c5fd05b5a214109c25688d3704aed5484f9a7792f2", "number": "0x1b4", "parentHash": "0x9646252be9520f6e71339a8df9c55e4d7619deeb018d2a3f2d21fc165dde5eb5", "sha3Uncles": "0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347", "size": "0x027f07", "stateRoot": "0xd5855eb08b3387c0af375e9cdb6acfc05eb8f519e419b874b6ff2ffda7ed1dff", "timestamp": "0x54e34e8e" "totalDifficulty": "0x027f07", "transactions": [] "transactionsRoot": "0x56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421", "uncles": ["0x1606e5...", "0xd5145a9..."] } } ``` --- #### eth_getBlockByNumber ##### Description Returns information about a block specified by number ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| |2|{`boolean`}|`true` will pull full transaction objects, `false` will pull transaction hashes| ##### Returns {`null|object`} - `null` if no block is found, otherwise a block object with the following members: - {[`Data`](#data)} `extraData` - "extra data" field of this block - {[`Data`](#data)} `hash` - block hash or `null` if pending - {[`Data`](#data)} `logsBloom` - logs bloom filter or `null` if pending - {[`Data`](#data)} `miner` - address that received this block's mining rewards - {[`Data`](#data)} `nonce` - proof-of-work hash or `null` if pending - {[`Data`](#data)} `parentHash` - parent block hash - {[`Data`](#data)} `receiptsRoot` -root of the this block's receipts trie - {[`Data`](#data)} `sha3Uncles` - SHA3 of the uncles data in this block - {[`Data`](#data)} `stateRoot` - root of this block's final state trie - {[`Data`](#data)} `transactionsRoot` - root of this block's transaction trie - {[`Quantity`](#quantity)} `difficulty` - difficulty for this block - {[`Quantity`](#quantity)} `gasLimit` - maximum gas allowed in this block - {[`Quantity`](#quantity)} `gasUsed` - total used gas by all transactions in this block - {[`Quantity`](#quantity)} `number` - block number or `null` if pending - {[`Quantity`](#quantity)} `size` - size of this block in bytes - {[`Quantity`](#quantity)} `timestamp` - unix timestamp of when this block was collated - {[`Quantity`](#quantity)} `totalDifficulty` - total difficulty of the chain until this block - {`Array`} `transactions` - list of transaction objects or hashes - {`Array`} `uncles` - list of uncle hashes ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getBlockByNumber", "params":["0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", true] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "difficulty": "0x027f07", "extraData": "0x0000000000000000000000000000000000000000000000000000000000000000", "gasLimit": "0x9f759", "gasUsed": "0x9f759", "hash": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "logsBloom": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "miner": "0x4e65fda2159562a496f9f3522f89122a3088497a", "nonce": "0xe04d296d2460cfb8472af2c5fd05b5a214109c25688d3704aed5484f9a7792f2", "number": "0x1b4", "parentHash": "0x9646252be9520f6e71339a8df9c55e4d7619deeb018d2a3f2d21fc165dde5eb5", "sha3Uncles": "0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347", "size": "0x027f07", "stateRoot": "0xd5855eb08b3387c0af375e9cdb6acfc05eb8f519e419b874b6ff2ffda7ed1dff", "timestamp": "0x54e34e8e" "totalDifficulty": "0x027f07", "transactions": [] "transactionsRoot": "0x56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421", "uncles": ["0x1606e5...", "0xd5145a9..."] } } ``` --- #### eth_getBlockTransactionCountByHash ##### Description Returns the number of transactions in a block specified by block hash ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a block| ##### Returns {[`Quantity`](#quantity)} - number of transactions in the specified block ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getBlockTransactionCountByHash", "params": ["0xc94770007dda54cF92009BFF0dE90c06F603a09f"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xc" } ``` --- #### eth_getBlockTransactionCountByNumber ##### Description Returns the number of transactions in a block specified by block number ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| ##### Returns {[`Quantity`](#quantity)} - number of transactions in the specified block ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getBlockTransactionCountByNumber", "params": ["0xe8"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xa" } ``` --- #### eth_getCode ##### Description Returns the contract code stored at a given address ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address to query for code| |2|{[`Quantity`](#quantity)\|`string`\|[`Block Identifier`](#block-identifier)}|block number, or one of `"latest"`, `"earliest"` or `"pending"`, or a block identifier as described in [`Block Identifier`](#block-identifier)| ##### Returns {[`Data`](#data)} - code from the specified address ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getCode", "params": ["0xa94f5374fce5edbc8e2a8697c15331677e6ebf0b", "0x2"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x600160008035811a818181146012578301005b601b6001356025565b8060005260206000f25b600060078202905091905056" } ``` --- #### eth_getFilterChanges ##### Description Returns a list of all logs based on filter ID since the last log retrieval ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)}|ID of the filter| ##### Returns {`Array`} - array of log objects with the following members: - {[`Data`](#data)} `address` - address from which this log originated - {[`Data`](#data)} `blockHash` - hash of block containing this log or `null` if pending - {[`Data`](#data)} `data` - contains the non-indexed arguments of the log - {[`Data`](#data)} `transactionHash` - hash of the transaction that created this log or `null` if pending - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this log or `null` if pending - {[`Quantity`](#quantity)} `logIndex` - index of this log within its block or `null` if pending - {[`Quantity`](#quantity)} `transactionIndex` - index of the transaction that created this log or `null` if pending - {[`Data[]`](#data)} `topics` - list of order-dependent topics - {`boolean`} `removed` - `true` if this filter has been destroyed and is invalid **Note:** The return value of `eth_getFilterChanges` when retrieving logs from `eth_newBlockFilter` and `eth_newPendingTransactionFilter` filters will be an array of hashes, not an array of Log objects. ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getFilterChanges", "params": ["0x16"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": [{ "address": "0x16c5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockHash": "0x8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockNumber":"0x1b4", "data":"0x0000000000000000000000000000000000000000000000000000000000000000", "logIndex": "0x1", "topics": [], "transactionHash": "0xdf829c5a142f1fccd7d8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcf", "transactionIndex": "0x0" }] } ``` --- #### eth_getFilterLogs ##### Description Returns a list of all logs based on filter ID ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)}|ID of the filter| ##### Returns {`Array`} - array of log objects with the following members: - {[`Data`](#data)} address - address from which this log originated - {[`Data`](#data)} blockHash - hash of block containing this log or `null` if pending - {[`Data`](#data)} data - contains the non-indexed arguments of the log - {[`Data`](#data)} transactionHash - hash of the transaction that created this log or `null` if pending - {[`Quantity`](#quantity)} blockNumber - number of block containing this log or `null` if pending - {[`Quantity`](#quantity)} logIndex - index of this log within its block or `null` if pending - {[`Quantity`](#quantity)} transactionIndex - index of the transaction that created this log or `null` if pending - {`Array`} topics - list of order-dependent topics - {`boolean`} removed - `true` if this filter has been destroyed and is invalid **Note:** The return value of `eth_getFilterLogs` when retrieving logs from `eth_newBlockFilter` and `eth_newPendingTransactionFilter` filters will be an array of hashes, not an array of Log objects. ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getFilterLogs", "params": ["0x16"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": [{ "address": "0x16c5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockHash": "0x8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockNumber":"0x1b4", "data":"0x0000000000000000000000000000000000000000000000000000000000000000", "logIndex": "0x1", "topics": [], "transactionHash": "0xdf829c5a142f1fccd7d8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcf", "transactionIndex": "0x0" }] } ``` --- #### eth_getLogs ##### Description Returns a list of all logs based on a filter object ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Quantity`](#quantity)\|`string`} `[fromBlock]` - block number, or one of `"latest"`, `"earliest"` or `"pending"`
@property {[`Quantity`](#quantity)\|`string`} `[toBlock]` - block number, or one of `"latest"`, `"earliest"` or `"pending"`
@property {[`Data`](#data)\|[`Data[]`](#data)} `[address]` - contract address or a list of addresses from which logs should originate
@property {[`Data[]`](#data)} `[topics]` - list of order-dependent topics
@property {[`Data`](#data)} `[blockhash]` - restrict logs to a block by hash| **Note:** If `blockhash` is passed, neither `fromBlock` nor `toBlock` are allowed or respected. ##### Returns {`Array`} - array of log objects with the following members: - {[`Data`](#data)} `address` - address from which this log originated - {[`Data`](#data)} `blockHash` - hash of block containing this log or `null` if pending - {[`Data`](#data)} `data` - contains the non-indexed arguments of the log - {[`Data`](#data)} `transactionHash` - hash of the transaction that created this log or `null` if pending - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this log or `null` if pending - {[`Quantity`](#quantity)} `logIndex` - index of this log within its block or `null` if pending - {[`Quantity`](#quantity)} `transactionIndex` - index of the transaction that created this log or `null` if pending - {[`Data`](#data)} `topics` - list of order-dependent topics - {`boolean`} `removed` - `true` if this filter has been destroyed and is invalid ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getLogs", "params": [{ "topics":["0x000000000000000000000000a94f5374fce5edbc8e2a8697c15331677e6ebf0b"] }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": [{ "address": "0x16c5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockHash": "0x8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcfdf829c5a142f1fccd7d", "blockNumber":"0x1b4", "data":"0x0000000000000000000000000000000000000000000000000000000000000000", "logIndex": "0x1", "topics": [], "transactionHash": "0xdf829c5a142f1fccd7d8216c5785ac562ff41e2dcfdf5785ac562ff41e2dcf", "transactionIndex": "0x0" }] } ``` --- #### eth_getStorageAt ##### Description Returns the value from a storage position at an address ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address of stored data| |2|{[`Quantity`](#quantity)}|index into stored data| |3|{[`Quantity`](#quantity)\|`string`\|[`Block Identifier`](#block-identifier)}|block number, or one of `"latest"`, `"earliest"` or `"pending"`, or a block identifier as described in [`Block Identifier`](#block-identifier)| ##### Returns {[`Data`](#data)} - value stored at the given address and data index ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getStorageAt", "params": ["0x295a70b2de5e3953354a6a8344e616ed314d7251", "0x0", "latest"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x00000000000000000000000000000000000000000000000000000000000004d2" } ``` --- #### eth_getTransactionByBlockHashAndIndex ##### Description Returns information about a transaction specified by block hash and transaction index ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a block| |2|{[`Quantity`](#quantity)}|index of a transaction in the specified block| ##### Returns {`null|object`} - `null` if no transaction is found, otherwise a transaction object with the following members: - {[`Data`](#data)} `r` - ECDSA signature r - {[`Data`](#data)} `s` - ECDSA signature s - {[`Data`](#data)} `blockHash` - hash of block containing this transaction or `null` if pending - {[`Data`](#data)} `from` - transaction sender - {[`Data`](#data)} `hash` - hash of this transaction - {[`Data`](#data)} `input` - contract code or a hashed method call - {[`Data`](#data)} `to` - transaction recipient or `null` if deploying a contract - {[`Quantity`](#quantity)} `v` - ECDSA recovery ID - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this transaction or `null` if pending - {[`Quantity`](#quantity)} `gas` - gas provided for transaction execution - {[`Quantity`](#quantity)} `gasPrice` - price in wei of each gas used - {[`Quantity`](#quantity)} `nonce` - unique number identifying this transaction - {[`Quantity`](#quantity)} `transactionIndex` - index of this transaction in the block or `null` if pending - {[`Quantity`](#quantity)} `value` - value in wei sent with this transaction ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getTransactionByBlockHashAndIndex", "params":["0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "0x0"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "blockHash": "0x1d59ff54b1eb26b013ce3cb5fc9dab3705b415a67127a003c3e61eb445bb8df2", "blockNumber": "0x5daf3b", "from": "0xa7d9ddbe1f17865597fbd27ec712455208b6b76d", "gas": "0xc350", "gasPrice": "0x4a817c800", "hash": "0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b", "input": "0x68656c6c6f21", "nonce": "0x15", "r": "0x1b5e176d927f8e9ab405058b2d2457392da3e20f328b16ddabcebc33eaac5fea", "s": "0x4ba69724e8f69de52f0125ad8b3c5c2cef33019bac3249e2c0a2192766d1721c", "to": "0xf02c1c8e6114b1dbe8937a39260b5b0a374432bb", "transactionIndex": "0x41", "v": "0x25", "value": "0xf3dbb76162000" } } ``` --- #### eth_getTransactionByBlockNumberAndIndex ##### Description Returns information about a transaction specified by block number and transaction index ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| |2|{[`Quantity`](#quantity)}|index of a transaction in the specified block| ##### Returns {`null|object`} - `null` if no transaction is found, otherwise a transaction object with the following members: - {[`Data`](#data)} `r` - ECDSA signature r - {[`Data`](#data)} `s` - ECDSA signature s - {[`Data`](#data)} `blockHash` - hash of block containing this transaction or `null` if pending - {[`Data`](#data)} `from` - transaction sender - {[`Data`](#data)} `hash` - hash of this transaction - {[`Data`](#data)} `input` - contract code or a hashed method call - {[`Data`](#data)} `to` - transaction recipient or `null` if deploying a contract - {[`Quantity`](#quantity)} `v` - ECDSA recovery ID - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this transaction or `null` if pending - {[`Quantity`](#quantity)} `gas` - gas provided for transaction execution - {[`Quantity`](#quantity)} `gasPrice` - price in wei of each gas used - {[`Quantity`](#quantity)} `nonce` - unique number identifying this transaction - {[`Quantity`](#quantity)} `transactionIndex` - index of this transaction in the block or `null` if pending - {[`Quantity`](#quantity)} `value` - value in wei sent with this transaction ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getTransactionByBlockNumberAndIndex", "params":["0x29c", "0x0"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "blockHash": "0x1d59ff54b1eb26b013ce3cb5fc9dab3705b415a67127a003c3e61eb445bb8df2", "blockNumber": "0x5daf3b", "from": "0xa7d9ddbe1f17865597fbd27ec712455208b6b76d", "gas": "0xc350", "gasPrice": "0x4a817c800", "hash": "0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b", "input": "0x68656c6c6f21", "nonce": "0x15", "r": "0x1b5e176d927f8e9ab405058b2d2457392da3e20f328b16ddabcebc33eaac5fea", "s": "0x4ba69724e8f69de52f0125ad8b3c5c2cef33019bac3249e2c0a2192766d1721c", "to": "0xf02c1c8e6114b1dbe8937a39260b5b0a374432bb", "transactionIndex": "0x41", "v": "0x25", "value": "0xf3dbb76162000" } } ``` --- #### eth_getTransactionByHash ##### Description Returns information about a transaction specified by hash ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a transaction| ##### Returns {`null|object`} - `null` if no transaction is found, otherwise a transaction object with the following members: - {[`Data`](#data)} `r` - ECDSA signature r - {[`Data`](#data)} `s` - ECDSA signature s - {[`Data`](#data)} `blockHash` - hash of block containing this transaction or `null` if pending - {[`Data`](#data)} `from` - transaction sender - {[`Data`](#data)} `hash` - hash of this transaction - {[`Data`](#data)} `input` - contract code or a hashed method call - {[`Data`](#data)} `to` - transaction recipient or `null` if deploying a contract - {[`Quantity`](#quantity)} `v` - ECDSA recovery ID - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this transaction or `null` if pending - {[`Quantity`](#quantity)} `gas` - gas provided for transaction execution - {[`Quantity`](#quantity)} `gasPrice` - price in wei of each gas used - {[`Quantity`](#quantity)} `nonce` - unique number identifying this transaction - {[`Quantity`](#quantity)} `transactionIndex` - index of this transaction in the block or `null` if pending - {[`Quantity`](#quantity)} `value` - value in wei sent with this transaction ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getTransactionByHash", "params": ["0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "blockHash": "0x1d59ff54b1eb26b013ce3cb5fc9dab3705b415a67127a003c3e61eb445bb8df2", "blockNumber": "0x5daf3b", "from": "0xa7d9ddbe1f17865597fbd27ec712455208b6b76d", "gas": "0xc350", "gasPrice": "0x4a817c800", "hash": "0x88df016429689c079f3b2f6ad39fa052532c56795b733da78a91ebe6a713944b", "input": "0x68656c6c6f21", "nonce": "0x15", "r": "0x1b5e176d927f8e9ab405058b2d2457392da3e20f328b16ddabcebc33eaac5fea", "s": "0x4ba69724e8f69de52f0125ad8b3c5c2cef33019bac3249e2c0a2192766d1721c", "to": "0xf02c1c8e6114b1dbe8937a39260b5b0a374432bb", "transactionIndex": "0x41", "v": "0x25", "value": "0xf3dbb76162000" } } ``` --- #### eth_getTransactionCount ##### Description Returns the number of transactions sent from an address ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address to query for sent transactions| |2|{[`Quantity`](#quantity)\|`string`\|[`Block Identifier`](#block-identifier)}|block number, or one of `"latest"`, `"earliest"` or `"pending"`, or a block identifier as described in [`Block Identifier`](#block-identifier)| ##### Returns {[`Quantity`](#quantity)} - number of transactions sent from the specified address ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getTransactionCount", "params": ["0xc94770007dda54cF92009BFF0dE90c06F603a09f", "latest"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x1" } ``` --- #### eth_getTransactionReceipt ##### Description Returns the receipt of a transaction specified by hash **Note:** Transaction receipts are unavailable for pending transactions. ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a transaction| ##### Returns {`null|object`} - `null` if no transaction is found, otherwise a transaction receipt object with the following members: - {[`Data`](#data)} `blockHash` - hash of block containing this transaction - {[`Data`](#data)} `contractAddress` - address of new contract or `null` if no contract was created - {[`Data`](#data)} `from` - transaction sender - {[`Data`](#data)} `logsBloom` - logs bloom filter - {[`Data`](#data)} `to` - transaction recipient or `null` if deploying a contract - {[`Data`](#data)} `transactionHash` - hash of this transaction - {[`Quantity`](#quantity)} `blockNumber` - number of block containing this transaction - {[`Quantity`](#quantity)} `cumulativeGasUsed` - gas used by this and all preceding transactions in this block - {[`Quantity`](#quantity)} `gasUsed` - gas used by this transaction - {[`Quantity`](#quantity)} `status` - `1` if this transaction was successful or `0` if it failed - {[`Quantity`](#quantity)} `transactionIndex` - index of this transaction in the block - {`Array`} `logs` - list of log objects generated by this transaction ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getTransactionReceipt", "params": ["0xb903239f8543d04b5dc1ba6579132b143087c68db1b2168786408fcbce568238"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "blockHash": '0xc6ef2fc5426d6ad6fd9e2a26abeab0aa2411b7ab17f30a99d3cb96aed1d1055b', "blockNumber": '0xb', "contractAddress": '0xb60e8dd61c5d32be8058bb8eb970870f07233155', "cumulativeGasUsed": '0x33bc', "gasUsed": '0x4dc', "logs": [], "logsBloom": "0x00...0", "status": "0x1", "transactionHash": '0xb903239f8543d04b5dc1ba6579132b143087c68db1b2168786408fcbce568238', "transactionIndex": '0x1' } } ``` --- #### eth_getUncleByBlockHashAndIndex ##### Description Returns information about an uncle specified by block hash and uncle index position ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a block| |2|{[`Quantity`](#quantity)}|index of uncle| ##### Returns {`null|object`} - `null` if no block or uncle is found, otherwise an uncle object with the following members: - {[`Data`](#data)} `extraData` - "extra data" field of this block - {[`Data`](#data)} `hash` - block hash or `null` if pending - {[`Data`](#data)} `logsBloom` - logs bloom filter or `null` if pending - {[`Data`](#data)} `miner` - address that received this block's mining rewards - {[`Data`](#data)} `nonce` - proof-of-work hash or `null` if pending - {[`Data`](#data)} `parentHash` - parent block hash - {[`Data`](#data)} `receiptsRoot` -root of the this block's receipts trie - {[`Data`](#data)} `sha3Uncles` - SHA3 of the uncles data in this block - {[`Data`](#data)} `stateRoot` - root of this block's final state trie - {[`Data`](#data)} `transactionsRoot` - root of this block's transaction trie - {[`Quantity`](#quantity)} `difficulty` - difficulty for this block - {[`Quantity`](#quantity)} `gasLimit` - maximum gas allowed in this block - {[`Quantity`](#quantity)} `gasUsed` - total used gas by all transactions in this block - {[`Quantity`](#quantity)} `number` - block number or `null` if pending - {[`Quantity`](#quantity)} `size` - size of this block in bytes - {[`Quantity`](#quantity)} `timestamp` - unix timestamp of when this block was collated - {[`Quantity`](#quantity)} `totalDifficulty` - total difficulty of the chain until this block - {`Array`} `uncles` - list of uncle hashes ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getUncleByBlockHashAndIndex", "params": ["0xc6ef2fc5426d6ad6fd9e2a26abeab0aa2411b7ab17f30a99d3cb96aed1d1055b", "0x0"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "difficulty": "0x027f07", "extraData": "0x0000000000000000000000000000000000000000000000000000000000000000", "gasLimit": "0x9f759", "gasUsed": "0x9f759", "hash": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "logsBloom": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "miner": "0x4e65fda2159562a496f9f3522f89122a3088497a", "nonce": "0xe04d296d2460cfb8472af2c5fd05b5a214109c25688d3704aed5484f9a7792f2", "number": "0x1b4", "parentHash": "0x9646252be9520f6e71339a8df9c55e4d7619deeb018d2a3f2d21fc165dde5eb5", "sha3Uncles": "0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347", "size": "0x027f07", "stateRoot": "0xd5855eb08b3387c0af375e9cdb6acfc05eb8f519e419b874b6ff2ffda7ed1dff", "timestamp": "0x54e34e8e" "totalDifficulty": "0x027f07", "transactionsRoot": "0x56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421", "uncles": [] } } ``` --- #### eth_getUncleByBlockNumberAndIndex ##### Description Returns information about an uncle specified by block number and uncle index position ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| |2|{[`Quantity`](#quantity)}|index of uncle| ##### Returns {`null|object`} - `null` if no block or uncle is found, otherwise an uncle object with the following members: - {[`Data`](#data)} `extraData` - "extra data" field of this block - {[`Data`](#data)} `hash` - block hash or `null` if pending - {[`Data`](#data)} `logsBloom` - logs bloom filter or `null` if pending - {[`Data`](#data)} `miner` - address that received this block's mining rewards - {[`Data`](#data)} `nonce` - proof-of-work hash or `null` if pending - {[`Data`](#data)} `parentHash` - parent block hash - {[`Data`](#data)} `receiptsRoot` -root of the this block's receipts trie - {[`Data`](#data)} `sha3Uncles` - SHA3 of the uncles data in this block - {[`Data`](#data)} `stateRoot` - root of this block's final state trie - {[`Data`](#data)} `transactionsRoot` - root of this block's transaction trie - {[`Quantity`](#quantity)} `difficulty` - difficulty for this block - {[`Quantity`](#quantity)} `gasLimit` - maximum gas allowed in this block - {[`Quantity`](#quantity)} `gasUsed` - total used gas by all transactions in this block - {[`Quantity`](#quantity)} `number` - block number or `null` if pending - {[`Quantity`](#quantity)} `size` - size of this block in bytes - {[`Quantity`](#quantity)} `timestamp` - unix timestamp of when this block was collated - {[`Quantity`](#quantity)} `totalDifficulty` - total difficulty of the chain until this block - {`Array`} `uncles` - list of uncle hashes ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getUncleByBlockNumberAndIndex", "params": ["0x29c", "0x0"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "difficulty": "0x027f07", "extraData": "0x0000000000000000000000000000000000000000000000000000000000000000", "gasLimit": "0x9f759", "gasUsed": "0x9f759", "hash": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "logsBloom": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331", "miner": "0x4e65fda2159562a496f9f3522f89122a3088497a", "nonce": "0xe04d296d2460cfb8472af2c5fd05b5a214109c25688d3704aed5484f9a7792f2", "number": "0x1b4", "parentHash": "0x9646252be9520f6e71339a8df9c55e4d7619deeb018d2a3f2d21fc165dde5eb5", "sha3Uncles": "0x1dcc4de8dec75d7aab85b567b6ccd41ad312451b948a7413f0a142fd40d49347", "size": "0x027f07", "stateRoot": "0xd5855eb08b3387c0af375e9cdb6acfc05eb8f519e419b874b6ff2ffda7ed1dff", "timestamp": "0x54e34e8e" "totalDifficulty": "0x027f07", "transactionsRoot": "0x56e81f171bcc55a6ff8345e692c0f86e5b48e01b996cadc001622fb5e363b421", "uncles": [] } } ``` --- #### eth_getUncleCountByBlockHash ##### Description Returns the number of uncles in a block specified by block hash ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash of a block| ##### Returns {[`Quantity`](#quantity)} - number of uncles in the specified block ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getUncleCountByBlockHash", "params": ["0xc94770007dda54cF92009BFF0dE90c06F603a09f"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xc" } ``` --- #### eth_getUncleCountByBlockNumber ##### Description Returns the number of uncles in a block specified by block number ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)\|`string`}|block number, or one of `"latest"`, `"earliest"` or `"pending"`| ##### Returns {[`Quantity`](#quantity)} - number of uncles in the specified block ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getUncleCountByBlockNumber", "params": ["0xe8"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x1" } ``` --- #### eth_getWork ##### Description Returns a list containing relevant information for proof-of-work ##### Parameters _none_ ##### Returns {[`Data[]`](#data)} - array with the following items: 1. {[`Data`](#data)} - current block header pow-hash 1. {[`Data`](#data)} - seed hash used for the DAG 1. {[`Data`](#data)} - boundary condition ("target"), 2^256 / difficulty ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_getWork", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": [ "0x1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef", "0x5EED00000000000000000000000000005EED0000000000000000000000000000", "0xd1ff1c01710000000000000000000000d1ff1c01710000000000000000000000" ] } ``` --- #### eth_hashrate ##### Description Returns the number of hashes-per-second this node is mining at ##### Parameters _(none)_ ##### Returns {[`Quantity`](#quantity)} - number of hashes-per-second ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_hashrate", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x38a" } ``` --- #### eth_mining ##### Description Determines if this client is mining new blocks ##### Parameters _(none)_ ##### Returns {`boolean`} - `true` if this client is mining or `false` if it is not mining ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_mining", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": true } ``` --- #### eth_newBlockFilter ##### Description Creates a filter to listen for new blocks that can be used with `eth_getFilterChanges` ##### Parameters _none_ ##### Returns {[`Quantity`](#quantity)} - ID of the newly-created filter that can be used with `eth_getFilterChanges` ##### Example ```sh # Request curl -X POST --data '{ "id": 1337 "jsonrpc": "2.0", "method": "eth_newBlockFilter", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x1" } ``` --- #### eth_newFilter ##### Description Creates a filter to listen for specific state changes that can then be used with `eth_getFilterChanges` ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Quantity`](#quantity)\|`string`} `[fromBlock]` - block number, or one of `"latest"`, `"earliest"` or `"pending"`
@property {[`Quantity`](#quantity)\|`string`} `[toBlock]` - block number, or one of `"latest"`, `"earliest"` or `"pending"`
@property {[`Data`](#data)\|[`Data[]`](#data)} `[address]` - contract address or a list of addresses from which logs should originate
@property {[`Data[]`](#data)} `[topics]` - list of order-dependent topics| **Note:** Topics are order-dependent. A transaction with a log with topics `[A, B]` will be matched by the following topic filters: - `[]` - "anything" - `[A]` - "A in first position (and anything after)" - `[null, B]` - "anything in first position AND B in second position (and anything after)" - `[A, B]` - "A in first position AND B in second position (and anything after)" - `[[A, B], [A, B]]` - "(A OR B) in first position AND (A OR B) in second position (and anything after)" ##### Returns {[`Quantity`](#quantity)} - ID of the newly-created filter that can be used with `eth_getFilterChanges` ##### Example ```sh # Request curl -X POST --data '{ "id": 1337 "jsonrpc": "2.0", "method": "eth_newFilter", "params": [{ "topics": ["0x0000000000000000000000000000000000000000000000000000000012341234"] }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x1" } ``` --- #### eth_newPendingTransactionFilter ##### Description Creates a filter to listen for new pending transactions that can be used with `eth_getFilterChanges` ##### Parameters _none_ ##### Returns {[`Quantity`](#quantity)} - ID of the newly-created filter that can be used with `eth_getFilterChanges` ##### Example ```sh # Request curl -X POST --data '{ "id": 1337 "jsonrpc": "2.0", "method": "eth_newPendingTransactionFilter", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x1" } ``` --- #### eth_protocolVersion ##### Description Returns the current Ethereum protocol version ##### Parameters _(none)_ ##### Returns {`string`} - current Ethereum protocol version ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_protocolVersion", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "54" } ``` --- #### eth_sendRawTransaction ##### Description Sends and already-signed transaction to the network ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|signed transaction data| ##### Returns {[`Data`](#data)} - transaction hash, or the zero hash if the transaction is not yet available ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_sendRawTransaction", "params": ["0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331" } ``` --- #### eth_sendTransaction ##### Description Creates, signs, and sends a new transaction to the network ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Data`](#data)} `from` - transaction sender
@property {[`Data`](#data)} `[to]` - transaction recipient
@property {[`Quantity`](#quantity)} `[gas="0x15f90"]` - gas provided for transaction execution
@property {[`Quantity`](#quantity)} `[gasPrice]` - price in wei of each gas used
@property {[`Quantity`](#quantity)} `[value]` - value in wei sent with this transaction
@property {[`Data`](#data)} `[data]` - contract code or a hashed method call with encoded args
@property {[`Quantity`](#quantity)} `[nonce]` - unique number identifying this transaction| ##### Returns {[`Data`](#data)} - transaction hash, or the zero hash if the transaction is not yet available ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_sendTransaction", "params": [{ "data": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675", "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155", "gas": "0x76c0", "gasPrice": "0x9184e72a000", "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", "value": "0x9184e72a" }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xe670ec64341771606e55d6b4ca35a1a6b75ee3d5145a99d05921026d1527331" } ``` --- #### eth_sign ##### Description Calculates an Ethereum-specific signature in the form of `keccak256("\x19Ethereum Signed Message:\n" + len(message) + message))` ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address to use for signing| |2|{[`Data`](#data)}|data to sign| ##### Returns {[`Data`](#data)} - signature hash of the provided data ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_sign", "params": ["0x9b2055d370f73ec7d8a03e965129118dc8f5bf83", "0xdeadbeaf"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xa3f20717a250c2b0b729b7e5becbff67fdaef7e0699da4de7ca5895b02a170a12d887fd3b17bfdce3481f10bea41f45ba9f709d39ce8325427b57afcfc994cee1b" } ``` --- #### eth_signTransaction ##### Description Signs a transaction that can be submitted to the network at a later time using with `eth_sendRawTransaction` ##### Parameters |#|Type|Description| |-|-|-| |1|{`object`}|@property {[`Data`](#data)} `from` - transaction sender
@property {[`Data`](#data)} `[to]` - transaction recipient
@property {[`Quantity`](#quantity)} `[gas="0x15f90"]` - gas provided for transaction execution
@property {[`Quantity`](#quantity)} `[gasPrice]` - price in wei of each gas used
@property {[`Quantity`](#quantity)} `[value]` - value in wei sent with this transaction
@property {[`Data`](#data)} `[data]` - contract code or a hashed method call with encoded args
@property {[`Quantity`](#quantity)} `[nonce]` - unique number identifying this transaction| ##### Returns {[`Data`](#data)} - signature hash of the transaction object ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_signTransaction", "params": [{ "data": "0xd46e8dd67c5d32be8d46e8dd67c5d32be8058bb8eb970870f072445675058bb8eb970870f072445675", "from": "0xb60e8dd61c5d32be8058bb8eb970870f07233155", "gas": "0x76c0", "gasPrice": "0x9184e72a000", "to": "0xd46e8dd67c5d32be8058bb8eb970870f07244567", "value": "0x9184e72a" }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0xa3f20717a250c2b0b729b7e5becbff67fdaef7e0699da4de7ca5895b02a170a12d887fd3b17bfdce3481f10bea41f45ba9f709d39ce8325427b57afcfc994cee1b" } ``` --- #### eth_signTypedData ##### Description Calculates an Ethereum-specific signature in the form of `keccak256("\x19Ethereum Signed Message:\n" + len(message) + message))` ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|address to use for signing| |2|{[`Data`](#data)}|message to sign containing type information, a domain separator, and data| **Note:** Client developers should refer to EIP-712 for complete semantics around [encoding and signing data](./eip-712.md#specification). Dapp developers should refer to EIP-712 for the expected structure of [RPC method input parameters](./eip-712.md#parameters). ##### Returns {[`Data`](#data)} - signature hash of the provided message ##### Example ```sh # Request curl -X POST --data '{ "id": 1337 "jsonrpc": "2.0", "method": "eth_signTypedData", "params": ["0xCD2a3d9F938E13CD947Ec05AbC7FE734Df8DD826", { "types": { "EIP712Domain": [{ "name": "name", "type": "string" }, { "name": "version", "type": "string" }, { "name": "chainId", "type": "uint256" }, { "name": "verifyingContract", "type": "address" }], "Person": [{ "name": "name", "type": "string" }, { "name": "wallet", "type": "address" }], "Mail": [{ "name": "from", "type": "Person" }, { "name": "to", "type": "Person" }, { "name": "contents", "type": "string" }] }, "primaryType": "Mail", "domain": { "name": "Ether Mail", "version": "1", "chainId": 1, "verifyingContract": "0xCcCCccccCCCCcCCCCCCcCcCccCcCCCcCcccccccC" }, "message": { "from": { "name": "Cow", "wallet": "0xCD2a3d9F938E13CD947Ec05AbC7FE734Df8DD826" }, "to": { "name": "Bob", "wallet": "0xbBbBBBBbbBBBbbbBbbBbbbbBBbBbbbbBbBbbBBbB" }, "contents": "Hello, Bob!" } }] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": "0x4355c47d63924e8a72e509b65029052eb6c299d53a04e167c5775fd466751c9d07299936d304c153f6443dfa05f40ff007d72911b6f72307f996231605b915621c" } ``` --- #### eth_submitHashrate ##### Description Submit a mining hashrate ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|hash rate| |2|{[`Data`](#data)}|random ID identifying this node| ##### Returns {`boolean`} - `true` if submitting went through successfully, `false` otherwise ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_submitHashrate", "params": [ "0x0000000000000000000000000000000000000000000000000000000000500000", "0x59daa26581d0acd1fce254fb7e85952f4c09d0915afd33d3886cd914bc7d283c" ] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": true } ``` --- #### eth_submitWork ##### Description Submit a proof-of-work solution ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Data`](#data)}|nonce found| |2|{[`Data`](#data)}|header's pow-hash| |3|{[`Data`](#data)}|mix digest| ##### Returns {`boolean`} - `true` if the provided solution is valid, `false` otherwise ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_submitWork", "params": [ "0x0000000000000001", "0x1234567890abcdef1234567890abcdef1234567890abcdef1234567890abcdef", "0xD1GE5700000000000000000000000000D1GE5700000000000000000000000000" ] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": true } ``` --- #### eth_syncing ##### Description Returns information about the status of this client's network synchronization ##### Parameters _(none)_ ##### Returns {`boolean|object`} - `false` if this client is not syncing with the network, otherwise an object with the following members: - {[`Quantity`](#quantity)} `currentBlock` - number of the most-recent block synced - {[`Quantity`](#quantity)} `highestBlock` - number of latest block on the network - {[`Quantity`](#quantity)} `startingBlock` - block number at which syncing started ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_syncing", "params": [] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": { "currentBlock": '0x386', "highestBlock": '0x454', "startingBlock": '0x384' } } ``` --- #### eth_uninstallFilter ##### Description Destroys a filter based on filter ID **Note:** This should only be called if a filter and its notifications are no longer needed. This will also be called automatically on a filter if its notifications are not retrieved using `eth_getFilterChanges` for a period of time. ##### Parameters |#|Type|Description| |-|-|-| |1|{[`Quantity`](#quantity)}|ID of the filter to destroy| ##### Returns {`boolean`} - `true` if the filter is found and successfully destroyed or `false` if it is not ##### Example ```sh # Request curl -X POST --data '{ "id": 1337, "jsonrpc": "2.0", "method": "eth_uninstallFilter", "params": ["0xb"] }' # Response { "id": 1337, "jsonrpc": "2.0", "result": true } ``` --- ## Rationale Much of Ethereum's effectiveness as an enterprise-grade application platform depends on its ability to provide a reliable and predictable developer experience. Nodes created by the current generation of Ethereum clients expose RPC endpoints with differing method signatures; this forces applications to work around method inconsistencies to maintain compatibility with various Ethereum RPC implementations. Both Ethereum client developers and downstream dapp developers lack a formal Ethereum RPC specification. This proposal standardizes such a specification in a way that's versionable and modifiable through the traditional EIP process. ## Backwards compatibility This proposal impacts Ethereum client developers by requiring that any exposed RPC interface adheres to this specification. This proposal impacts dapp developers by requiring that any RPC calls currently used in applications are made according to this specification. ## Implementation The current generation of Ethereum clients includes several implementations that attempt to expose this RPC specification: |Client Name|Language|Homepage| |-|-|-| |Geth|Go|[geth.ethereum.org](https://geth.ethereum.org)| |Parity|Rust|[parity.io/ethereum](https://parity.io/ethereum)| |Aleth|C++|[cpp-ethereum.org](https://cpp-ethereum.org)| ## Copyright Copyright and related rights waived via [CC0](../LICENSE.md).